WallDetect Physical Detection System provides early detection of potential intruders attempting to penetrate walls, roofs and floors protected by the WallDetect detection barrier.

The piezoelectric sensor cable is applied to the fabric or structure protected. Simply by installing the sensor cable in a conduit securely fixed to the wall, roof or floor is protected.

The detection range of the sensor cable will pick up audible signals and vibrations to penetrate the protected barrier/wall.

The noises and vibrations, transmitted to the seismic analyser for analysis and detection. The seismic analyser detection channels, programmed to identify the signals created by noises and vibrations. These signals usually occur during intrusions and attempt to penetrate the protected surface.

Blocking the WallDetect physical detection system is not possible, unlike other forms of detection. The system continually monitors the fabric, against attempts to penetrate the walls, roof or also ceiling of the secured area(s). The physical detection system, ideal for the protection of bonded warehouses, strong rooms, explosives stores or any building or structure in which high values or hazardous materials are stored.

The sensor cable is available installed on the inside or outside of the building, on the walls and also on the roof to provide early detection of would-be intruders attempting to break in through the fabric of the building.

A CageDetect high-security cage detection system. Designed to protect goods or plant secured within a security cage. The Security Cage Detection System, suitable for the protection of internal or external security cages.

Perimeter Intrusion Detection systems detect noises and vibrations that occur during intrusion attempts. The CageDetec detection system features a piezoelectric cable attached to the mesh of the cage. Attempts to penetrate the structure create a series of mechanical noises/vibrations. Detected by the sensor cable and converted into electrical signals.

The security cage detection system features an analyser, set up to detect attempts to penetrate the security cage. The sensor cable has optimum detection and signal to noise ratio for improved detection and reduced nuisance alarms. The extremely versatile sensor cable has almost no detection capability limitations and is applied for the protection of all types of security structures, cages, walls, floors and also roofs.

CageDetect comprises an analyser and a sensor cable and systems are fully monitored. All powered by only 12VDC. Clean alarm relay contacts are also provided for each zone plus a tamper alarm for interfacing directly with all types of security management and monitoring systems.

Designed using standard components, configured and installed to meet with the specific cage design, dimensions and also operational requirements.

FenceProtect Electric Security Fencing, an advanced electrified perimeter security system that fully monitors the protected boundary of the high voltage pulses on or off.

Ideally installed on sites of Critical National Infrastructure (CNI Sites). Also fully monitored high and low voltage perimeter security systems.

Our ‘true’ low voltage system design, when ‘disarmed’ and the HV pulses turned off, continues to be fully monitored even though no shocks are present when touched. If the wire is cut, shorted or tampered with then the system will still generate an alarm state. In the same way as when the HV pulses are present.

Our electric security fencing systems are tailored and zoned to meet site-specific operational and/or CCTV detection zone requirements.

Designed to provide perimeter security that deters, detects, denies and defends against potential intruders with a short, sharp, painful but regulated safe electric shock.

The zone Alarm output is provided for interfacing with CCTV and other local/remote monitoring systems.

Zaun’s electric security fence system is a physical and psychological barrier for intruders. Pulsed electrified perimeter security systems provide total security and protection of any perimeter or boundary.

The construction of the system creates a psychological and physical barrier to prevent would-be intruders from achieving their objectives.

A complete perimeter security fencing solution. The TriProtect system, developed as a secure perimeter protection solution, is used to protect high-security sites.

This perimeter security fencing solution is a 2.4-metre high security mesh fencing system (HiSec 358, HiSec Super 6, HiSec Super 10 or also ArmaWeave are recommended). But, first, creating a physical high-security perimeter barrier. This barrier is usually 2.4 metres above ground and 300mm below for anti-burrow.

The perimeter security fencing solution also includes our perimeter intrusion detection system. Applied to the high-security mesh fencing and detects cutting, climbing and also penetration of the security fence.

A 1.2 metre high enhanced electrified topping is also applied to the top of the security fence—an impenetrable anti-climb deterrent and detection topping system.

The TriProtect perimeter security fencing solution, typically designed and constructed with 50-metre PIDS zones. Or also available following the site CCTV / security specification zone requirements.

This high-security perimeter fencing solution is combined with perimeter intrusion detection systems. Fully controlled and monitored by the security management system for total perimeter security and an early warning of unauthorised access of the protected perimeter.

Zaun Perimeter Intrusion Detection System (PIDS). A fence mounted perimeter detection system designed for all types of security fencing systems and toppings providing early warning of any intrusion attempt.

These perimeter intrusion detection systems have a proven track record for the protection of all types of risk from normal commercial risks from; industrial estates, factories, garages and warehouses to military and Government premises, prisons and also CNI sites (Critical National Infrastructure).

FenceDetect perimeter intrusion detection systems provide zone alarm outputs for integration with CCTV and other remote monitoring technologies. Installed PIDS onto security fences, designed to monitor penetration or climbing of the security fence together with FenceDetect to provide an electrified topping system that ensures the highest level of intruder detection and deterrent.